Shanghai metal stamping parts processing plant, choose materials according to different requirements + stamping accuracy ±0.01mm

The technicians of the Shanghai metal stamping parts processing plant said that the metal stamping parts die will have a variety of metal material stamping processes, which have to withstand shock, vibration, friction, high pressure, tension, bending and torsion during work, and even Working at higher temperatures (such as cold extrusion), the working conditions are complex, and it is prone to wear, fatigue, fracture, deformation and other phenomena. Therefore, according to the different working conditions of the metal stamping die, the selected die parts and materials should also be coordinated due to the process. The following Xiaoshuo will take you to understand: 1. The requirements of the blanking die material require high wear resistance and hardness for the working parts of the thin plate blanking die, while the thick plate blanking die requires high wear resistance. In addition to the resistance and compression yield point, in order to prevent the mold from breaking or chipping, it should also have high fracture resistance, high bending strength and toughness. 2. The requirements of drawing die materials require that the material of the working parts of the die has good anti-adhesion (anti-seizure), high wear resistance and hardness, certain strength and toughness, and good cutting performance, and it is deformed during heat treatment. Just wait. Hardware, 15 years of focus on Shanghai metal stamping parts processing plant, 20,000+ sets of mold customization and production experience, hundreds of precision processing and production equipment, daily production capacity of 3 million punching times, 16 strict quality inspections for quality control, stamping The accuracy can reach ±0.01mm. It can quickly solve the time-critical problems of metal stamping parts, solve the problems of stamping accuracy, and solve the problems of production quality. Choose, choose rest assured!